To ensure that you choose the right size for your new shoes and grind shoes, we have compiled some important information and tips below.
Take the time to read our size guide and find the right size the first time. If you still have any questions, please feel free to contact us.
- In short: Your barefoot foot length plus 5 mm for a performance-oriented fit or 10 mm for greater comfort must not exceed the stated Mondo size of the shoe (shown as “Mondo” in our shop, e.g. 26.6 cm).
- Shoe width: You can find the width of our models in the short description or product specifications. We distinguish between five categories: very narrow, narrow, medium, wide, and very wide.
The Right Shoe Size
If you are not yet familiar with the brand or model of a grind shoe or regular shoe, there is only one truly reliable size measurement: the Mondo size. In our shop, this is stated either in millimetres (mm) or centimetres (cm).
You can find the Mondo size both in the size chart within the product images and directly in the size selection.
Measuring foot length correctlyYour barefoot foot length plus 5 mm for a performance-oriented fit or 10 mm for greater comfort must not exceed the stated Mondo size of the shoe (shown as “Mondo” in our shop, e.g. 26.6 cm).
Example:
- Measure your foot length barefoot. Stand with your heels against a door frame or a straight wall without a skirting board. Do not trace the outline of your foot. Instead, slide an object with a straight edge, such as a cardboard box or chopping board, up to your longest toe. Then measure the distance between the wall and the object.
- Add another 5 to 10 mm to your measured foot length (depending on the thickness of your socks and your preferred level of comfort).
- The result must not exceed the stated Mondo size of the selected shoe size.
If your foot measures 26.0 cm, adding 5 mm for maximum performance results in a required internal length of 26.5 cm.
If the shoe in EU size 41 has a Mondo size of 26.4 cm, it is 1 mm too short. In this case, you should choose EU size 42.
Trying them on: When standing with your legs straight in your fully laced and fastened shoes, your toes may lightly touch the front of the outer shell. However, they should neither press against it nor be curled.
In the typical grinding and sliding stance, with your knees bent forwards and positioned roughly above your toes, there should be a few millimetres of space between your toes and the front of the shoes. Your toes should not touch the front of the shoes in this position.
The Right Fit and Shoe Width
In the product specifications or short description, you will find information about the width of each shoe under “Fit.”
We distinguish between five categories:
- very narrow
- narrow
- medium
- wide
- very wide
You should only choose a very narrow or narrow fit if you are certain that you have very narrow feet. These fits may also be the right choice if maximum control and an exceptionally secure fit are more important to you than comfort.
A pronounced foot arch can often be identified by a strongly crescent-shaped footprint—for example, when walking across the floor with wet feet. In this case, your foot width is probably in the medium range.
If, on the other hand, you have relatively flat feet and leave a less crescent-shaped or almost complete footprint, you probably have wider feet.
Measuring foot width correctlyExample:
If your bare foot measures approximately 26 cm in length and 11 cm in width, as shown in our illustration, it tends to be on the wider side.
As every shoe fits differently, these measurements are intended only as a rough guide.
The following points are also particularly important for grind shoes:
- Choosing the right size for your grind shoes is essential for optimal control during tricks such as slides, grinds, and jumps.
In the typical grinding stance, with your knees positioned over your toes, there should be some space between your toes and the front of the shoe. - This extra room is important because your foot may slide slightly forwards during slides, grinds, jumps, or sudden stops. If the shoe is too short or your foot is not held securely enough, your toes may hit the front, which can cause severe pain.
Further tips and tricks to avoid, eliminate or adapt pain in shoes and skates to your foot shape and needs can be found here!